Our 15T kit is rated for a gross feed mixer mass of 15,000kg. Typically suited to single axle mixers. Kits start at $3,700 + GST for the load cells & basic indicator with no mounting hardware. Mounting hardware is available to suit a wide range of mixers and chassis configurations. Feel free to send us photos of your mixer via our CONTACT page so we can recommend the appropriate kit. For details on our mixer indicators go to our Indicators page.
UNIVERSAL LOAD CELL KIT
This kit suspends the chassis/bin above the axle or axles and the chassis/body is then mounted back onto the axle or axles through 2 universal load cells, this configuration is then coupled with a tow hitch that also includes a load cell sensor to isolate the feed mixer chassis/body on the 3 point weighing system.This kit suspends the chassis/bin above the axle or axles and the chassis/body is then mounted back onto the axle or axles through 2 universal load cells, this configuration is then also coupled with a tow hitch that also includes a load cell sensor to isolate the feed mixer chassis/body on the 3 point weighing system.
INSTALLATION INSTRUCTIONS
Depending on the model of the mixer you are trying to upgrade will depend on the level of equipment & skills required to retrofit your bin. Whatever your situation we have installation instructions to assist in the changeover. The image below gives an indication of the detail you can expect to receive.
